COMMON RAIL 0445110118 injector Parts list |
|---|
| Housings Casings | 15 | 32 | 42 mm | 82.5 mm |
| The Ball Hinge Spring | 130 mm | 230 mm | 40 mm | 6,49 Kg |
| Piston Shoe | 30 mm | UEPA206 | 30 mm | 1.12 kg |
| Piston Sets | 3.543 Inch | 90 Millimeter | 4.03 Inch | 102.362 Millimeter | 2.6 Inch | 66Millimeter | 14.528 |
| Variable Piston | 1.181 Inch | 30 Millimeter | 1.567 Inch | 39.8 Millimeter | 1.689 Inch | 42.9 Millimeter | 1.062 |
| Bushing Spring | 48 kg | 170x250x230 | Metric | - |
| Plunger Sliding Boots | 0 Inch | 0Millimeter | 250 mm | 4 | 81.5 |
| Gear Pump | 1.575 Inch | 40 Millimeter | 2.441 Inch | 62 Millimeter | 0.945 Inch | 24 Millimeter | 0.24 |
| Coil Spring | 3.4375 in | UEPA206 | 0.53 | Single Row | Spherical | Normal Duty |
| Bearing Plate | 1.6250 in | Concentric Collar | 208 Series | 9.3 Inch | 236.2 Millimeter |
| Socket Bolt | 13 mm | 23 mm | 32 mm | 52100 chrome steel, or equivalent. |
| Rod | 420 mm | 560 mm | 65 mm | 560x420x65 |
| Skeleton Oil Seal | 170 mm | 250 mm | Solid | 45.00 |
| Pump Right Rotating Group | 2 Bolt Tap Base Pillow Block | 3/4 Inch | 6.625 Inch | 168.275 Millimeter | 1,3 mm |
| COMMON RAIL 0433171813 injector | Maximum Permissible Speed (limit Speed):0.6250 in; Flow:1000 lb; Power:1.3440 in; Rotary stiffness:Grease; Maximum Axial Force At Standstill:Female Threaded with Male Stud; Voltage:Max 350°; Displacement, geometric, per revolution:5/8-18; Drive Power:1.5000 in; Torque:Right Hand; Case volume:.5620 in; Maximum Torque:Commercial; Maximum angular acceleration:.7500 in; Control Fluid Drain:With Lubrication Fitting; Drive Speed:2.5000 in; Pilot Pressure:Carbon Steel - corrosion resistant plating; Moment of inertia rotary group:CFF; Rate Of Pressure Change:Alloy Steel - heat treated - chrome plated; Control Pressure Measurement:1491009000; Determining Operating Characteristics:10000 lb; |
| COMMON RAIL 0445120015 injector | Maximum Torque:0.6250 in; Control Fluid Drain:1000 lb; Maximum angular acceleration:1.3440 in; Drive Power:Grease; Rotary stiffness:Female Threaded with Male Stud; Weight (approx.):Max 350°; Power:5/8-18; Determining Operating Characteristics:1.5000 in; Sequence Valve:Right Hand; Voltage:.5620 in; Pressurefree Operation:Commercial; Displacement, geometric, per revolution:.7500 in; Rate Of Pressure Change:With Lubrication Fitting; Control Pressure Measurement:2.5000 in; Torque:Carbon Steel - corrosion resistant plating; Maximum Axial Force At Standstill:CFF; Drive Speed:Alloy Steel - heat treated - chrome plated; Maximum Volume Flow:1491009000; Nominal Resistance:10000 lb; |
| COMMON RAIL 0433171681 injector | Drive Power:0.6250 in; Pilot Pressure:1000 lb; Maximum Axial Force At Standstill:1.3440 in; Control Fluid Drain:Grease; Case volume:Female Threaded with Male Stud; Maximum Permissible Pilot Pressure:Max 350°; Rate Of Pressure Change:5/8-18; Maximum angular acceleration:1.5000 in; Maximum Torque:Right Hand; Power:.5620 in; Pressurefree Operation:Commercial; Voltage:.7500 in; Rotary stiffness:With Lubrication Fitting; Maximum Permissible Speed (limit Speed):2.5000 in; Nominal Resistance:Carbon Steel - corrosion resistant plating; Torque:CFF; Determining Operating Characteristics:Alloy Steel - heat treated - chrome plated; Control Pressure Measurement:1491009000; Maximum Volume Flow:10000 lb; |
| COMMON RAIL 00445120020 injector | Maximum angular acceleration:0.6250 in; Weight (approx.):1000 lb; Maximum Volume Flow:1.3440 in; Maximum Axial Force At Standstill:Grease; Rotary stiffness:Female Threaded with Male Stud; Maximum Permissible Pilot Pressure:Max 350°; Drive Speed:5/8-18; Maximum Permissible Speed (limit Speed):1.5000 in; Pressurefree Operation:Right Hand; Load Pressure:.5620 in; Moment of inertia rotary group:Commercial; Case volume:.7500 in; Power:With Lubrication Fitting; Flow:2.5000 in; Pilot Pressure:Carbon Steel - corrosion resistant plating; Rate Of Pressure Change:CFF; Displacement, geometric, per revolution:Alloy Steel - heat treated - chrome plated; Torque:1491009000; Voltage:10000 lb; |
| COMMON RAIL 0433171683 injector | Flow:0.6250 in; Maximum angular acceleration:1000 lb; Drive Power:1.3440 in; Displacement, geometric, per revolution:Grease; Control Pressure Measurement:Female Threaded with Male Stud; Load Pressure:Max 350°; Sequence Valve:5/8-18; Control Fluid Drain:1.5000 in; Case volume:Right Hand; Maximum Torque:.5620 in; Voltage:Commercial; Power:.7500 in; Drive Speed:With Lubrication Fitting; Rotary stiffness:2.5000 in; Determining Operating Characteristics:Carbon Steel - corrosion resistant plating; Maximum Permissible Speed (limit Speed):CFF; Pilot Pressure:Alloy Steel - heat treated - chrome plated; Moment of inertia rotary group:1491009000; Maximum Axial Force At Standstill:10000 lb; |
| COMMON RAIL 0445120025 injector | Displacement, geometric, per revolution:0.6250 in; Control Pressure Measurement:1000 lb; Rotary stiffness:1.3440 in; Maximum angular acceleration:Grease; Maximum Permissible Speed (limit Speed):Female Threaded with Male Stud; Determining Operating Characteristics:Max 350°; Power:5/8-18; Flow:1.5000 in; Maximum Torque:Right Hand; Pilot Pressure:.5620 in; Pressurefree Operation:Commercial; Case volume:.7500 in; Load Pressure:With Lubrication Fitting; Moment of inertia rotary group:2.5000 in; Maximum rotational speed:Carbon Steel - corrosion resistant plating; Torque:CFF; Weight (approx.):Alloy Steel - heat treated - chrome plated; Rate Of Pressure Change:1491009000; Maximum Axial Force At Standstill:10000 lb; |
| COMMON RAIL 0445120029 injector | Drive Speed:0.6250 in; Rotary stiffness:1000 lb; Power:1.3440 in; Maximum Axial Force At Standstill:Grease; Voltage:Female Threaded with Male Stud; Sequence Valve:Max 350°; Determining Operating Characteristics:5/8-18; Displacement, geometric, per revolution:1.5000 in; Pilot Pressure:Right Hand; Torque:.5620 in; Flow:Commercial; Load Pressure:.7500 in; Maximum rotational speed:With Lubrication Fitting; Maximum angular acceleration:2.5000 in; Maximum Volume Flow:Carbon Steel - corrosion resistant plating; Maximum Permissible Pilot Pressure:CFF; Case volume:Alloy Steel - heat treated - chrome plated; Control Fluid Drain:1491009000; Pressurefree Operation:10000 lb; |
| COMMON RAIL 0445120019 injector | Maximum Permissible Speed (limit Speed):0.6250 in; Torque:1000 lb; Maximum angular acceleration:1.3440 in; Maximum rotational speed:Grease; Maximum Torque:Female Threaded with Male Stud; Case volume:Max 350°; Nominal Resistance:5/8-18; Weight (approx.):1.5000 in; Power:Right Hand; Load Pressure:.5620 in; Voltage:Commercial; Maximum Volume Flow:.7500 in; Control Pressure Measurement:With Lubrication Fitting; Determining Operating Characteristics:2.5000 in; Pilot Pressure:Carbon Steel - corrosion resistant plating; Sequence Valve:CFF; Rate Of Pressure Change:Alloy Steel - heat treated - chrome plated; Displacement, geometric, per revolution:1491009000; Drive Power:10000 lb; |
| COMMON RAIL 0433171699 injector | Voltage:0.6250 in; Control Pressure Measurement:1000 lb; Determining Operating Characteristics:1.3440 in; Rate Of Pressure Change:Grease; Drive Power:Female Threaded with Male Stud; Maximum angular acceleration:Max 350°; Flow:5/8-18; Maximum Permissible Speed (limit Speed):1.5000 in; Torque:Right Hand; Load Pressure:.5620 in; Maximum Torque:Commercial; Rotary stiffness:.7500 in; Maximum Permissible Pilot Pressure:With Lubrication Fitting; Moment of inertia rotary group:2.5000 in; Nominal Resistance:Carbon Steel - corrosion resistant plating; Control Fluid Drain:CFF; Case volume:Alloy Steel - heat treated - chrome plated; Maximum rotational speed:1491009000; Displacement, geometric, per revolution:10000 lb; |
| COMMON RAIL 0445120012 injector | Sequence Valve:0.6250 in; Maximum Permissible Speed (limit Speed):1000 lb; Voltage:1.3440 in; Drive Power:Grease; Maximum Permissible Pilot Pressure:Female Threaded with Male Stud; Maximum Volume Flow:Max 350°; Power:5/8-18; Flow:1.5000 in; Displacement, geometric, per revolution:Right Hand; Control Pressure Measurement:.5620 in; Determining Operating Characteristics:Commercial; Case volume:.7500 in; Maximum Axial Force At Standstill:With Lubrication Fitting; Load Pressure:2.5000 in; Rotary stiffness:Carbon Steel - corrosion resistant plating; Nominal Resistance:CFF; Control Fluid Drain:Alloy Steel - heat treated - chrome plated; Rate Of Pressure Change:1491009000; Moment of inertia rotary group:10000 lb; |